Getting Started:

 

  1. Open your document that you wish to edit.  You can do this by going to File>open then you can browse your documents.

 

Anchors

  1. You want to place your curser and click on the area that you want to refer back too.  (this is where you anchor will be placed)
  2. Next step is to hit insert>named anchor and this process will open the named anchor box.
  3. Type in the title of the anchor then click OK
  4. You will then notice an anchor will appear where you had your curser.
  5. This process can be repeated as many times as necessary.

 

 

Linking

 

  1. You want to highlight the word or phrase that you want to be able to click on and move to where your anchor is.
  2. Next you want to look at the properties inspector and use the point to file.
  3. Drag this file up to the anchor.
  4. Once you hit the anchor you will see that the name of the anchor will appear in the links box.
  5. Once this occurs let go of the mouse and your link shall be connected.

 

Checking

  1. To check and make sure that you have linked it properly you will want to go to the preview button.  This looks like a little globe at the top of your tool bar.
  2. When the screen pops up click on your link and your page should jump.

 

Objects: